top of page

Maintenance of kitchen floor tiles

Maintaining kitchen floor tiles is essential to keep them looking fresh, clean, and free from damage. Here are some practical tips to help you care for your kitchen floor tiles:


1. Regular Cleaning

  • Sweep or Vacuum Daily: Dirt, dust, and debris can accumulate on your kitchen floor, so it’s important to sweep or vacuum regularly to prevent scratching and dullness.

  • Mop with Mild Cleaner: Mop the floor with warm water and a mild cleaner or dish soap to remove grease, stains, and grime. Avoid harsh chemicals that may damage the tile surface or grout.

  • Use a Microfiber Mop: A microfiber mop is ideal for cleaning floor tiles, as it traps dust and dirt without causing scratches. It’s also highly effective for cleaning without excessive water.


2. Protect the Tiles

  • Use Area Rugs and Mats: Place rugs or mats in high-traffic areas (like the entry or in front of the sink) to protect the tiles from wear and tear. Ensure the mats have non-slip backings to prevent accidents.

  • Furniture Pads: Put felt pads under the legs of furniture and appliances to avoid scratches or dents in the tile surface, especially for heavy objects like refrigerators or dishwashers.


3. Clean Spills Immediately

  • Wipe Up Spills Quickly: Kitchens are prone to spills from food, drinks, oils, and grease. Clean these spills immediately to prevent stains or sticky residue from settling into the tile or grout.

  • Use a Gentle Cloth: For spills, use a soft cloth or sponge to clean up to avoid scratching the tile surface. For stubborn stains, use a non-abrasive cleaner specifically designed for tiles.


4. Maintain the Grout

  • Seal the Grout: Grout is porous and can stain easily, so it's important to apply a grout sealer. This will help protect the grout from moisture and stains, making cleaning easier. Reapply the sealer every 6 to 12 months.

  • Clean Grout Regularly: Scrub the grout lines with a toothbrush or grout brush and a mixture of baking soda and water. For tougher stains, use a commercial grout cleaner, but be sure to test it in a small area first.

  • Avoid Excessive Moisture: Grout can absorb moisture if left damp for too long, so be sure to dry your floor after mopping to prevent mold and mildew.


5. Deep Clean the Tiles Periodically

  • Steam Clean for Deep Cleaning: For a more thorough clean, use a steam cleaner on your tiles. Steam helps lift dirt, grease, and grime, and it can disinfect the surface without harsh chemicals.

  • Use Tile-Specific Cleaner: Periodically use a tile and grout cleaner to maintain the tiles. Always follow the manufacturer’s instructions to avoid damaging the surface.


6. Remove Stains Promptly

  • Tackle Stains Immediately: Stains can become more difficult to remove if they are left for too long. For grease stains, a mixture of vinegar and water can help break down the grease. For tough stains, use a paste of baking soda and water and let it sit before scrubbing gently.

  • Avoid Abrasive Tools: Do not use steel wool or abrasive scrubbing pads as they can scratch or damage the tile surface.


7. Protect Against Scratches

  • Use Soft Shoes or Bare Feet: High heels or shoes with hard soles can leave marks or scratches on tile floors. Try to wear soft-soled shoes or go barefoot when walking on the tiles.

  • Trim Pet Nails: If you have pets, keep their nails trimmed to prevent scratches from their claws.


8. Prevent Water Damage

  • Fix Leaks Quickly: Leaky faucets, dishwashers, or pipes can cause water damage to your tiles and grout. Address any plumbing issues as soon as possible to prevent water from seeping into the floor and causing damage or mold growth.

  • Wipe Up Standing Water: Always dry any standing water, especially in areas where water may accumulate, like around the sink or near the dishwasher.


9. Buff the Tile for Shine

  • Polish Tiles Occasionally: For tiles that are glossy or shiny, you can buff them to restore their shine. Use a microfiber cloth or a tile polishing product designed for your tile material.

  • Avoid Excessive Wax: Wax can make tiles slippery and attract dust, so avoid using wax-based cleaners unless specifically recommended for your tile type.


10. Inspect for Damage

  • Check for Cracks or Chips: Inspect your tiles regularly for any cracks or chips that may have developed over time. Replace any damaged tiles to prevent further damage and to maintain the floor’s appearance.

  • Repair Cracked or Loose Tiles: If you notice any cracked or loose tiles, replace them promptly to prevent water or dirt from getting under the tile and causing further damage to the floor.

Get virtual help with DIY jobs with our xPorch App

app_call_screen.PNG

xPorch © 2025

Ask Us Anything!

Get help from a virtual expderts to fix your home renovation

xPorch offers homeowners the power to complete basic DIY repairs and renovations without spending hundreds of dollars on service calls. With xPorch, DIYers are a couple of clicks aways from connecting with experienced plumbers, electricians, and contractors. Our team offers on-demand virtual services around the year around all Canadian provinces.

 

  • Instagram
  • Facebook

Terms & Conditions    Privacy Policy  

bottom of page