top of page

Most common error codes for Amana stoves

Here are the most common error codes for Amana stoves and their potential causes along with solutions:


1. Error Code F1

  • Meaning: Control board failure.

  • Causes: This error typically indicates that the stove’s electronic control board has malfunctioned.

  • Solutions:

    • Unplug the stove for 5-10 minutes to reset the control board.

    • If the error persists, you may need to replace the control board.


2. Error Code F2

  • Meaning: Oven over-temperature.

  • Causes: The oven has exceeded its maximum safe temperature.

  • Solutions:

    • Ensure the oven is not being used for an extended period at high temperatures.

    • Check the oven temperature sensor to ensure it is functioning correctly.

    • If the sensor is defective, it should be replaced.


3. Error Code F3

  • Meaning: Oven temperature sensor open or shorted.

  • Causes: There could be an issue with the oven temperature sensor, such as a short circuit or open circuit.

  • Solutions:

    • Test the oven temperature sensor with a multimeter to verify if it’s functioning.

    • Replace the sensor if it’s damaged.


4. Error Code F4

  • Meaning: Oven door latch malfunction.

  • Causes: This error indicates a problem with the oven door latch, usually during the self-cleaning cycle.

  • Solutions:

    • Inspect the oven door latch and ensure it is not obstructed or broken.

    • Replace the latch if it is damaged or malfunctioning.


5. Error Code F5

  • Meaning: Faulty keypad.

  • Causes: This error typically occurs when the keypad or touchpad has failed or is not responding properly.

  • Solutions:

    • Check for any stuck buttons or physical damage on the keypad.

    • Reset the stove by unplugging it for a few minutes.

    • If the error continues, replace the keypad.


6. Error Code F7

  • Meaning: Control board communication error.

  • Causes: The communication between the control board and other components may be disrupted, usually due to a wiring issue or faulty control board.

  • Solutions:

    • Check all wiring connections between the control board and other components.

    • If the wiring is intact, the control board may need to be replaced.


7. Error Code F9

  • Meaning: Oven door stuck during self-cleaning.

  • Causes: The oven door may be stuck during the self-cleaning cycle due to a jammed latch or other issues.

  • Solutions:

    • Wait for the oven to cool down completely and try opening the door again.

    • If the door is still stuck, inspect the door latch mechanism.

    • If the latch is defective, it will need to be replaced.


8. Error Code E0

  • Meaning: Faulty door lock mechanism during self-cleaning.

  • Causes: If the door lock mechanism fails to engage or disengage properly, it may trigger this error during the self-cleaning cycle.

  • Solutions:

    • Check the lock mechanism for any visible damage or blockages.

    • If necessary, replace the door lock mechanism.


9. Error Code E1

  • Meaning: Problem with the oven temperature sensor.

  • Causes: A faulty temperature sensor may cause the oven to display this error code.

  • Solutions:

    • Test the sensor for continuity with a multimeter.

    • If the sensor is defective, replace it.


10. Error Code E2

  • Meaning: Oven temperature sensor reading too low.

  • Causes: This error occurs when the oven's temperature sensor reads a temperature that is too low.

  • Solutions:

    • Check the oven sensor and verify that it is properly connected.

    • If the sensor is faulty, replace it with a new one.


11. Error Code E3

  • Meaning: Oven door is not locked during self-cleaning.

  • Causes: The oven door is not securely locked during the self-cleaning cycle.

  • Solutions:

    • Ensure the door is fully closed and the latch is engaged.

    • If the latch is damaged, replace it.


12. Error Code E4

  • Meaning: Self-cleaning error.

  • Causes: A malfunction occurred during the self-cleaning cycle, often related to the door lock or the heating elements.

  • Solutions:

    • Wait for the oven to cool completely before attempting to open the door.

    • Check the heating elements and the door lock for any faults.

    • Replace any malfunctioning components as needed.


13. Error Code E5

  • Meaning: Fan or blower malfunction.

  • Causes: This error typically occurs when the oven's fan or blower is not working as expected.

  • Solutions:

    • Check for obstructions in the fan or blower.

    • Inspect the fan motor for any signs of wear or damage.

    • If the motor is faulty, replace it.


14. Error Code E6

  • Meaning: Oven control board malfunction.

  • Causes: A malfunction in the oven’s control board could cause this error code.

  • Solutions:

    • Unplug the stove for a few minutes to reset the control board.

    • If the error persists, consider replacing the control board.


General Troubleshooting Tips for Amana Stove Error Codes:

  • Reset the Stove: Unplugging the stove for 5-10 minutes can often reset the control board and resolve minor issues.

  • Inspect Components: For many error codes, visually inspecting parts like the temperature sensor, oven door latch, or control board can help identify the issue.

  • Use a Multimeter: For sensor-related errors, testing components like the temperature sensor or door lock with a multimeter can help determine if they are functioning properly.

  • Replace Faulty Parts: If you find any components are malfunctioning, replacing them (e.g., control boards, sensors, or door locks) will typically resolve the issue.

  • Consult the User Manual: For specific error codes related to your stove model, refer to the user manual, which may provide additional context and troubleshooting steps.

Get virtual help with DIY jobs with our xPorch App

app_call_screen.PNG

xPorch © 2025

Ask Us Anything!

Get help from a virtual expderts to fix your home renovation

xPorch offers homeowners the power to complete basic DIY repairs and renovations without spending hundreds of dollars on service calls. With xPorch, DIYers are a couple of clicks aways from connecting with experienced plumbers, electricians, and contractors. Our team offers on-demand virtual services around the year around all Canadian provinces.

 

  • Instagram
  • Facebook

Terms & Conditions    Privacy Policy  

bottom of page