top of page

Most common fault codes for a GE washer

Here are the most common fault codes for GE washers and their possible causes and solutions:


1. Error Code E1

  • Meaning: Water Supply Issue (Not filling with water)

  • Causes: The washer is not receiving water, possibly due to a blocked inlet valve, clogged hoses, or issues with the water supply.

  • Solutions:

    • Check that the water supply valves are fully open.

    • Inspect the hoses for kinks, leaks, or blockages.

    • Verify that the water inlet valve is functioning correctly and replace it if necessary.


2. Error Code E2

  • Meaning: Water Drain Issue (Not draining properly)

  • Causes: The washer is unable to drain water, likely due to a clogged drain pump, hose, or filter.

  • Solutions:

    • Inspect and clean the drain pump filter.

    • Check the drain hose for clogs or kinks.

    • Ensure the drain pump is operating correctly and replace it if necessary.


3. Error Code E3

  • Meaning: Unbalanced Load

  • Causes: The washer detects that the load is unbalanced, causing the washer to stop spinning or agitates incorrectly.

  • Solutions:

    • Redistribute the clothes evenly in the drum.

    • Avoid overloading the washer or washing large single items (like blankets) that can cause an imbalance.

    • If the problem persists, check the suspension system or shock absorbers for damage.


4. Error Code E4

  • Meaning: Water Temperature Issue

  • Causes: The washer is unable to detect the correct water temperature, potentially due to a faulty temperature sensor or wiring problem.

  • Solutions:

    • Check the water heater to ensure it is functioning properly.

    • Inspect the temperature sensor and its wiring for issues.

    • Replace the temperature sensor if it's malfunctioning.


5. Error Code E5

  • Meaning: Door Lock Issue

  • Causes: The washer is unable to lock the door, which may prevent the cycle from starting or completing.

  • Solutions:

    • Inspect the door latch and lock mechanism for any damage or wear.

    • Ensure the door is properly closed and latched.

    • If necessary, replace the door lock assembly.


6. Error Code E6

  • Meaning: Door Unlock Issue

  • Causes: The washer cannot unlock the door after the cycle has finished.

  • Solutions:

    • Check the door lock mechanism for any malfunctions.

    • Reset the washer by unplugging it for a few minutes.

    • If the problem persists, replace the door lock assembly.


7. Error Code E7

  • Meaning: Excessive Suds

  • Causes: The washer detects too many suds, which can interfere with the washer's ability to drain or spin properly.

  • Solutions:

    • Use only the recommended amount of HE detergent.

    • Run a rinse or spin cycle to remove excess suds.

    • If the detergent drawer is clogged, clean it out.


8. Error Code E8

  • Meaning: Water Level Sensor Issue

  • Causes: The water level sensor is not detecting the correct water level, which can prevent the washer from filling or draining properly.

  • Solutions:

    • Inspect the water level pressure switch for proper operation.

    • Check the hose attached to the pressure switch for blockages.

    • Replace the water level sensor or pressure switch if necessary.


9. Error Code F0

  • Meaning: Motor Issue

  • Causes: The washer motor is malfunctioning, or there is an issue with the motor control board.

  • Solutions:

    • Inspect the motor connections for loose or damaged wiring.

    • Check the motor for any visible damage or issues.

    • If the motor is defective, it may need to be replaced.


10. Error Code F1

  • Meaning: Control Board Error

  • Causes: The washer's control board has experienced a malfunction or is unable to communicate with other components.

  • Solutions:

    • Try resetting the washer by unplugging it for a few minutes.

    • Inspect the wiring connections between the control board and other parts.

    • If the control board is faulty, it may need to be replaced.


11. Error Code F2

  • Meaning: Water Drain Timeout

  • Causes: The washer is taking too long to drain, which could indicate a problem with the drain pump or hose.

  • Solutions:

    • Clean the drain filter and pump.

    • Check the drain hose for any blockages or kinks.

    • Ensure the pump is operating correctly and replace it if necessary.


12. Error Code F3

  • Meaning: Washer Overfilled

  • Causes: The washer has filled with more water than expected, which could be caused by a malfunctioning water inlet valve or pressure switch.

  • Solutions:

    • Inspect the water inlet valve for issues or debris that may be causing it to stay open.

    • Check the pressure switch and replace it if it is faulty.


13. Error Code F4

  • Meaning: Door Lock Error

  • Causes: The washer detects an issue with the door lock mechanism, which may prevent the cycle from starting or completing.

  • Solutions:

    • Check the door lock and latch for wear or malfunction.

    • If necessary, replace the door lock assembly.


14. Error Code F5

  • Meaning: Drive Motor Fault

  • Causes: The washer’s drive motor is experiencing a malfunction or is unable to function correctly.

  • Solutions:

    • Inspect the drive motor for any visible damage.

    • Check the wiring and connections leading to the motor.

    • If the motor is faulty, it may need to be replaced.


15. Error Code F6

  • Meaning: Pressure Switch or Water Level Sensor Issue

  • Causes: The washer is having trouble detecting the water level in the drum, often due to a faulty pressure switch or sensor.

  • Solutions:

    • Inspect the pressure switch and water level sensor for faults.

    • Clean the pressure hose to ensure it is not blocked.

    • Replace the water level sensor or pressure switch if necessary.


General Troubleshooting Tips for GE Washer Error Codes:

  • Reset the Washer: Unplugging the washer for a few minutes and then plugging it back in can help reset the control board and clear minor issues.

  • Check the Hoses and Filters: Ensure that all hoses are clear of blockages, and clean any filters or pump filters to ensure proper drainage.

  • Avoid Overloading: Overloading the washer can cause unbalanced load errors (E3, E7). Make sure to balance the load evenly for efficient operation.

  • Use the Right Detergent: Excessive suds can lead to drainage problems (E7). Always use HE (high-efficiency) detergent in the correct amount.

  • Inspect Door Latch/Lock: If there are errors related to the door, check that the latch and lock mechanisms are functioning properly.

Get virtual help with DIY jobs with our xPorch App

app_call_screen.PNG

xPorch © 2025

Ask Us Anything!

Get help from a virtual expderts to fix your home renovation

xPorch offers homeowners the power to complete basic DIY repairs and renovations without spending hundreds of dollars on service calls. With xPorch, DIYers are a couple of clicks aways from connecting with experienced plumbers, electricians, and contractors. Our team offers on-demand virtual services around the year around all Canadian provinces.

 

  • Instagram
  • Facebook

Terms & Conditions    Privacy Policy  

bottom of page