top of page

Most common error codes for a Frigidaire stove

Frigidaire stoves and ranges can display error codes to indicate specific issues that may need attention. Here are some of the most common error codes for Frigidaire stoves and their possible causes and solutions:


1. Error Code F1

  • Meaning: Electronic oven control (EOC) failure.

  • Causes:

    • Control board malfunction.

    • Faulty wiring or connection.

  • Solutions:

    • Reset the oven by unplugging it for a few minutes and plugging it back in.

    • Inspect the control board for visible damage or poor connections.

    • Replace the control board if necessary.


2. Error Code F3

  • Meaning: Oven temperature sensor failure.

  • Causes:

    • Faulty temperature sensor.

    • Open or shorted sensor wiring.

  • Solutions:

    • Test the temperature sensor with a multimeter to ensure it’s working properly.

    • Replace the sensor if it shows signs of damage.

    • Inspect the wiring for damage or loose connections.


3. Error Code F4

  • Meaning: Oven temperature too high.

  • Causes:

    • Faulty temperature sensor.

    • Malfunctioning oven control board.

  • Solutions:

    • Check the temperature sensor and replace it if needed.

    • Inspect the oven control board for issues that may be causing it to overheat.


4. Error Code F5

  • Meaning: Door lock failure (in self-cleaning models).

  • Causes:

    • Faulty door lock motor or switch.

    • A stuck or jammed door latch.

  • Solutions:

    • Inspect the door lock motor and switch for proper operation.

    • Clear any debris or obstruction from the door latch.

    • Replace faulty components as necessary.


5. Error Code F7

  • Meaning: Invalid key press or control board failure.

  • Causes:

    • Malfunctioning control board or touchpad.

    • Stuck keys on the touchpad.

  • Solutions:

    • Clean the touchpad to ensure no keys are stuck.

    • Reset the appliance by unplugging it for a few minutes.

    • If the issue persists, consider replacing the touchpad or control board.


6. Error Code F10

  • Meaning: Oven overheating.

  • Causes:

    • Faulty temperature sensor.

    • Oven control board issues.

  • Solutions:

    • Inspect and test the temperature sensor for proper functionality.

    • Replace the sensor or control board if faulty.


7. Error Code F11

  • Meaning: Oven control board failure (communication error).

  • Causes:

    • Loose or disconnected wiring.

    • A malfunctioning control board.

  • Solutions:

    • Check the wiring for loose or damaged connections.

    • Replace the control board if necessary.


8. Error Code E0

  • Meaning: Invalid or no signal from touchpad.

  • Causes:

    • Malfunctioning touchpad or control board.

    • Poor connection between the touchpad and control board.

  • Solutions:

    • Check the wiring connections between the touchpad and control board.

    • Replace the touchpad or control board if faulty.


9. Error Code E1

  • Meaning: Oven door not properly closed.

  • Causes:

    • Faulty door latch.

    • Door not properly aligned or closed.

  • Solutions:

    • Check the door latch for proper alignment.

    • Ensure the door is fully closed.

    • Replace the door latch if necessary.


10. Error Code E2

  • Meaning: Oven temperature too high.

  • Causes:

    • Malfunctioning temperature sensor.

    • Faulty thermostat.

  • Solutions:

    • Check and replace the temperature sensor or thermostat.

    • Inspect the oven control board for any signs of malfunction.


11. Error Code E3

  • Meaning: Oven control board or temperature sensor malfunction.

  • Causes:

    • Faulty temperature sensor.

    • A communication error between the control board and the sensor.

  • Solutions:

    • Test the temperature sensor for continuity and replace if needed.

    • Inspect the control board for damage or loose connections.


12. Error Code E4

  • Meaning: Self-cleaning cycle error.

  • Causes:

    • A problem with the door lock during the self-cleaning cycle.

    • Overheating during the cleaning cycle.

  • Solutions:

    • Check the door lock mechanism and motor.

    • Test the temperature sensor.

    • If the door lock or sensor is faulty, replace them.


13. Error Code E6

  • Meaning: Excessive voltage.

  • Causes:

    • High voltage entering the appliance.

    • Malfunctioning voltage regulator.

  • Solutions:

    • Check the power supply to ensure it is within the required range.

    • Test and replace the voltage regulator if faulty.


14. Error Code E7

  • Meaning: Oven temperature too low.

  • Causes:

    • Faulty thermostat.

    • Temperature sensor malfunction.

  • Solutions:

    • Inspect and replace the thermostat or temperature sensor if necessary.


15. Error Code E8

  • Meaning: Control board error.

  • Causes:

    • Faulty control board.

    • Wiring issues to the control board.

  • Solutions:

    • Inspect the control board for any signs of damage or malfunction.

    • Replace the control board if needed.


General Troubleshooting Tips:

  1. Reset the Appliance: Many issues can be resolved by resetting the stove. Simply unplug the appliance for 5-10 minutes, and then plug it back in.

  2. Inspect the Wiring: Loose or disconnected wiring can cause many error codes. Check all connections, especially those related to the control board, temperature sensors, and touchpad.

  3. Replace Faulty Components: For persistent error codes, the control board, temperature sensors, and touchpad are the most likely components to fail and require replacement.

  4. Consult the User Manual: Always refer to the user manual for specific error code meanings and troubleshooting steps for your Frigidaire stove model.

Get virtual help with DIY jobs with our xPorch App

app_call_screen.PNG

xPorch © 2025

Ask Us Anything!

Get help from a virtual expderts to fix your home renovation

xPorch offers homeowners the power to complete basic DIY repairs and renovations without spending hundreds of dollars on service calls. With xPorch, DIYers are a couple of clicks aways from connecting with experienced plumbers, electricians, and contractors. Our team offers on-demand virtual services around the year around all Canadian provinces.

 

  • Instagram
  • Facebook

Terms & Conditions    Privacy Policy  

bottom of page